Scosche

Products by Scosche

  • Now Available! boomBOTTLE+ Portable Speaker

    boomBOTTLE+ Rugged Speaker

    boomBOTTLE+ Controls

    IP67

    IP67 Dustproof/Waterproof
    Splash it. Spray it. Dunk it.
    And it floats!

    Charger

    Also includes a handy carabiner, 12W/2.4A USB wall charger and charging cable

    Key Features of the boomBOTTLE+ Portable Speaker:

    • Rugged IP67 Dustproof/Waterproof Construction
    • Dual 50mm Drivers and Passive Subwoofers Provide Rich, Clear Audio in 360 degrees
    • Rechargeable Battery for up to 15 Hours of Music Playback
    • Power Up Your Portable Devices with Built-in USB Charging (2.1A)
    • Dual Pairing for True Stereo Sound
    • Selectable Indoor/Outdoor EQ for Bold Rich Sound in All Environments
    • Unique Bottle Design Fits Into Water Bottle Cages and Cup Holders
    • Built-in Music Controls
  • 2015 VIP Awards for magicMOUNT & Rhythm+

    SCOSCHE is proud to announce that they are being honored as TWICE VIP (Very Important Product) Awards recipients. The magicMOUNT™family of mounting solutions was named as a winner in the “Accessories: Mounting Accessories” category, while the Rhythm+ was named a winner in the “Wearables” category. Chosen above other competing products in their respective categories, SCOSCHE’s products were voted by retailers and distributors as the top contender and the “best of” in each of the categories.

    The TWICE 2015 VIP Awards distinguished the magicMOUNT family of mounting solutions and Rhythm+ as significant within the categories named in terms of product features, design and value. This affirms SCOSCHE’s ongoing commitment to delivering product innovation, performance, quality and value to both consumers and retailers/distributors. It is also further validation of SCOSCHE’s 35 years of leadership in providing technology and innovation to the consumer technology and car audio marketplaces.

    The award-winning magicMOUNT cell phone holder and table mount family consists of different innovative magnetic mounting systems that conveniently mount smartphones, tablets and other mobile devices to a wide array of surfaces. The sleek, cradle-free design uses high-powered magnets to securely and safely mount devices where you use them most. Due to its open design, devices can be mounted in a 360° fashion permitting countless landscape or portrait viewing angles and full access to device controls and ports while in the car, at home or in the office.

    The award-winning Rhythm+ heart rate monitor is a direct chest strap replacement and easily attaches to your forearm for full wireless communication with your device. This app-powered heart rate monitor manages a user’s workout metrics and monitors heart rate, calories burned, distance, speed, pace and more via a smartphone, tablet and even various types of exercise equipment.. The Rhythm+ optically measures blood flow and body movement to ensure the most accurate data possible. With its dual-mode processor, users can simultaneously transmit heart rate data to multiple ANT+ displays or Bluetooth Smart™ enabled watch or smartphone app.

    Download the entire press release for the TWICE 2015 VIP AWARDS.

  • Wireless Bluetooth Earbuds

    Wireless Bluetooth Earbuds

    sportclipAIR

     

    Wireless Bluetooth Earbuds
    Finally, Bluetooth earbuds that won't weigh you down. These headphones are designed to deliver premium sounds and the soft hooks are customizable. The cable provides tangle-free comfort.

    • Ultralight
    • Full Range Acoustic Reproduction
    • Up to 7 Hours of Playtime
    • Comfortable, Secure, Custom Fit
    • Splash and Sweat Proof (IPX4 Rated)
    • Integrated Mic and Controls

    Sweatproof Earbuds

    IPX4 Sweatproof/Splashproof Earbuds
    Rinse them off after each workout and you're ready to go.

     

     

     

    Long Battery Life

    Up to 7 hours music playtime
    for those extra long workouts.

  • Rhythm+ App Support

    Buy The Scosche Rhythm+ Heart Rate Monitor

    The above Playlist will help you connect the Scosche Rhythm+ with Strava, Runkeeper, Digifit iCardio, Endomondo, and Wahoo Fitness.

    If you have more questions or you need Rhythm App support for your Rhythm+, please contact our support department.

    To watch all of the Scosche Rhythm+ App videos, please click the link below:
    Scosche Rhythm+ Support

    Email: techsupport@scosche.com
    Customer Service: (800) 363-4490
    Technical Support: (800) 363-4490 ext. 3

  • How to Connect the Scosche Rhythm+ Heart Rate Monitor to the Wahoo Fitness App

    Buy The Scosche Rhythm+ Heart Rate Monitor

    Wahoo Fitness Heart Rate Monitor App Support

    Hey Wahoo Fitness users, did you know you can see your heart rate on your ANT+ enabled device and Bluetooth Smart capable phone without wearing the annoying chest strap? The Scosche Rhythm+ is an accurate, comfortable to wear armband heart rate monitor which you can easily connect to Wahoo Fitness without needing to purchase ANY in app upgrades. By using the Rhythm+ with Wahoo Fitness you can see how much time you spend in each heart rate zone, track how much time in your customized Burn and Burst targeted zones, and other heart rate training metrics to help you measure your exercise intensity.

    Here’s how you can connect the Scosche Rhythm+ to Wahoo Fitness using your iOS device

    1. Turn ON Bluetooth in iPhone settings
    2. Open the Wahoo Fitness app and select Sensors
    3. Secure the Rhythm+ around your forearm and press and hold the multifunction button for 2 seconds to turn on
    4. Choose Add New Sensor
    5. Choose RHYTHM+
    6. Select Save Sensor
    7. RHYTHM+ successfully connected!
    8. Start Workout!

    Here’s How you can connect the Scosche rhythm+ to Wahoo Fitness using your Android device.

    1. Turn ON Bluetooth in Android settings
    2. Open the Wahoo Fitness app and select Sensors
    3. Secure the Rhythm+ around your forearm and press and hold the multifunction button for 2 seconds to turn on
    4. Choose Add New Sensor
    5. Choose RHYTHM+
    6. Select Save Sensor
    7. RHYTHM+ successfully connected!
    8. Start Workout!

    Train hard and smart with the Scosche Rhythm+ and Wahoo Fitness.

  • How to Connect the Scosche Rhythm+ Heart Rate Monitor to the RunKeeper App

    Buy The Scosche Rhythm+ Heart Rate Monitor

    RunKeeper Fitness App Support

    Hey RunKeeper users, did you know you can see your heart rate on your ANT+ enabled device and Bluetooth Smart capable phone without wearing the annoying chest strap? The Scosche Rhythm+ is an accurate, comfortable to wear armband heart rate monitor which you can easily connect to Runkeeper to track your Heart Rate while Running. Here’s how you can connect the Scosche Rhythm+ to Runkeeper using your iOS device

    1. Turn ON Bluetooth in iPhone settings
    2. Open the RunKeeper App and tap on Settings
    3. Under Manage Connections select Apps, Services, and Devices
    4. Under Manage Devices select Devices & Hardware
    5. Select Heart Rate Monitor
    6. RHYTHM+ successfully connected!
    7. Start Workout
    Here’s How you can connect the Scosche Rhythm+ to Runkeeper using your Android device

    1. Turn ON Bluetooth in android settings
    2. Open Runkeeper app
    3. Secure the Rhythm+ around your forearm and press and hold the multifunction button for 2 seconds to turn on
    4. From the main Runkeeper screen click on the gray heart icon with the exclamation point in the middle lower right hand corner
    5. Select on RHYTHM+.
    6. Once the RHYTHM+ is properly connected, the heart icon will be red
    7. Begin workout.

    Get the most out of your RunKeeper experience by tracking your heart rate during your next Run! Train hard and train smart with the Scosche Rhythm+ and RunKeeper.

  • How to Connect the Scosche Rhythm+ Heart Rate Monitor to the Endomondo Sports Tracker App

    Buy The Scosche Rhythm+ Heart Rate Monitor

    Endomondo Fitness App Support

    Hey Endomondo users, did you know you can see your heart rate on your ANT+ enabled device and Bluetooth Smart capable phone without wearing the annoying chest strap? The Scosche Rhythm+ is an accurate, comfortable to wear armband heart rate monitor which you can easily connect to the Endomondo app to see your average heart rate, time in each zone, and other training metrics to measure your exercise intensity and estimate calories burned.
    Here’s how you can connect the Scosche Rhythm+ to Endomondo using your iOS device

    1. Turn ON Bluetooth in iPhone settings
    2. Open the Endomondo app and select on the 3 lines near the top left corner
    3. Select Settings
    4. Select Heart Rate
    5. Choose Bluetooth Low Energy
    6. Secure the Rhythm+ around your forearm and press and hold the multifunction button for 2 seconds to turn on
    7. Select Pair
    8. RHYTHM+ successfully connected!
    9. Begin workout.
    Here’s How you can connect the Scosche rhythm+ to Endomondo using your Android device

    1. Turn ON Bluetooth in android settings
    2. Open the Endomondo app and select the 3 lines near the top left corner
    3. Select Settings, then select Accessory Settings
    4. Select Bluetooth SMART Sensors Heart Rate
    5. Secure the Rhythm+ around your forearm and press and hold the multifunction button for 2 seconds to turn on
    6. Select On to Activate your sensors, then press Scan
    7. Select Rhythm+
    8. RHYTHM+ successfully connected!
    9. Begin workout.
    Get the most out of your Endomondo experience! Train hard and train smart with the Scosche Rhythm+ and Endomondo.

  • How to Connect the Scosche Rhythm+ Heart Rate Monitor to the Digifit iCardio App

    Buy The Scosche Rhythm+ Heart Rate Monitor

    Digifit iCardio App Support

    Hey Digifit users, did you know you can see your heart rate on your ANT+ enabled device and Bluetooth Smart capable phone without wearing the annoying chest strap? The Scosche Rhythm+ is an accurate, comfortable to wear armband heart rate monitor which you can easily connect to the Digifit iCardio app to see your time in each zone, time splits, and other heart rate training metrics to measure your exercise intensity.
    Here’s how you can connect the Scosche Rhythm+ to Digifit using your iOS device

    1. Turn ON Bluetooth in iPhone settings
    2. Open the digifit app and Select Upgrades.
    3. Purchase individual in-app functionality and Enable Sensors for a one time $2.99 fee or Go Pro For more detailed fitness assessments. Complete the Purchase.
    4. Go Back home and select Settings, and Select My Sensors
    5. Secure the Rhythm+ around your forearm and press and hold the mulitfunction button for 2 seconds to turn on.
    6. Under Heart Rate Monitors, Swipe the Bluetooth Smart slider to the “On” Position.
    7. RHYTHM+ successfully connected!
    8. Go Home on the Digifit App and begin workout.

    Here’s How you can connect the Scosche rhythm+ to Digifit using your Android device

    1. Turn ON Bluetooth in android settings
    2. Open the digifit app and Select Upgrades.
    3. Purchase individual in-app functionality and Enable Sensors for a one time $2.99 fee or Go Pro For more detailed fitness assessments. Complete the Purchase.
    4. Go back home and select Settings
    5. Select My Sensors
    6. Select Heart Rate Monitor
    7. Secure the Rhythm+ around your forearm and press and hold the mulitfunction button for 2 seconds to turn on.
    8. Select Auto Detect HRM, and Select Rhythm+
    9. Go Back to My Sensors and make Sure Rhythm+ is Swiped to the On Position
    10. Go Home on the Digifit App and begin workout.
    Get the most informed and accurate heart rate training data from your workouts! Train hard and train smart with the Scosche Rhythm+ and the Digifit iCardio app.

  • How to Connect the Scosche Rhythm+ Heart Rate Monitor to the Strava App

    Buy The Scosche Rhythm+ Heart Rate Monitor

    Strava App Support

    Enable Heart Rate Sensors for Strava with The Scosche Rhythm+!

    Hey Strava users, did you know you can see your heart rate on your ANT+ enabled device and Bluetooth Smart capable phone without wearing the annoying chest strap? The Scosche Rhythm+ is an accurate, comfortable to wear armband heart rate monitor which you can easily connect to Strava to see your “suffer score,” “points in the red,” and other heart rate training metrics to measure your exercise intensity.
    Here’s how you can connect the Scosche Rhythm+ to Strava using your iOS device
    iOS Connection

    1. Turn ON Bluetooth in iPhone settings
    2. Open the Strava app and select More
    3. Select Settings
    4. Select on External Devices
    5. You will see an option for Bluetooth Sensors. Swipe the slider to the “ON” position
    6. Under Manage Sensors Swipe the Heart Rate to the “ON” position.
    7. Secure the Rhythm+ around your forearm and press and hold the multifunction button for 2 seconds to turn on.
    8. RHYTHM+ successfully connected!

    Android Connection

    1. Turn ON Bluetooth in Android settings
    2. Open the Strava app and go to your menu and select settings
    3. Turn Bluetooth Sensors on and Select Bluetooth 4.0 (Low Energy)
    4. Check the box next to Heart Rate
    5. Turn on RHYTHM+
    6. RHYTHM+ successfully connected!
    7. Start Workout!

    Make sure you are the King of the Mountains on your next ride or run! Train hard and smart with the Scosche Rhythm+ and Strava.

  • boomBOTTLE H2O at CES 2015

    CES 2015

    The International CES lived up to the hype. Packed with techies and showcasing the epitome of elite gadgetry, Scosche made quite the impression. We never miss the Las Vegas Consumer Electronic Show. The spectacular annual event, oftentimes thought of as the kid fair for adults, brought scores of buyers, manufacturers, and media to the tables. It provided us with the perfect venue to unveil our innovative boomBOTTLE.

    With remarkable sound, built-in power, and an enhanced speakerphone, the use it anywhere wireless speaker seamlessly fits inside bicycle water bottle cages. We’re talking about the boomBOTTLE, a rugged mobile waterproof Bluetooth speaker set to bring entertainment along for every ride.

    The International Consumer Electronics Show ended today, and as we look forward to CES 2016, inventive design remains at the forefront of our business. We encourage you to stick around, year-round, for the latest Scosche gadget news.

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2